palmax   Début   Suivant   Sommaire   Préc.page.lue   Accueil
Section: Devices and Network Interfaces (4)
Updated: xf86-input-palmax 1.2.0
Sommaire  



NAME   Début   Précédent   Suivant   Sommaire   Préc.page.lue   Accueil
palmax - Palmax (TR88L803) touchscreen driver  



SYNOPSIS   Début   Précédent   Suivant   Sommaire   Préc.page.lue   Accueil
Section N'34'InputDeviceN'34'
Identifier N'34'idevnameN'34'
Driver N'34'palmaxN'34'
Option N'34'DeviceN'34' N'34'devpathN'34'
  ...
EndSection  



DESCRIPTION   Début   Précédent   Suivant   Sommaire   Préc.page.lue   Accueil
palmax is an Xorg input driver for the Palmax PD1000/PD1100

The palmax driver functions as a pointer input device, and is normally used as the X server's core pointer. It supports positioning and mouse buttons using the touchscreen display and lid buttons on the Palmax machines.  




SUPPORTED HARDWARE   Début   Précédent   Suivant   Sommaire   Préc.page.lue   Accueil
Palmax PD1000, Palmax PD1100. In theory also any other system using a TR88L803 wired to a serial port.  



CONFIGURATION DETAILS   Début   Précédent   Suivant   Sommaire   Préc.page.lue   Accueil
Please refer to xorg.conf(5) for general configuration details and for options that can be used with all input drivers. This section only covers configuration details specific to this driver.

The following driver options are supported

Option N'34'MinXN'34' N'34'integerN'34'
Set the left hand X value from the touchscreen, for calibration.
Option N'34'MaxXN'34' N'34'integerN'34'
Set the right hand X value from the touchscreen, for calibration.
Option N'34'MinYN'34' N'34'integerN'34'
Set the top Y value from the touchscreen, for calibration.
Option N'34'MaxYN'34' N'34'integerN'34'
Set the bottom Y value from the touchscreen, for calibration.
Option N'34'ScreenN'34' N'34'integerN'34'
The screen to attach to the touchscreen when running with multiple screens. The default is screen 0.
Option N'34'DeviceN'34' N'34'stringN'34'
The serial port that is attached to the touchscreen interface. On the Palmax PD1000 and PD1100 this is ttyS0.
Option N'34'DeviceNameN'34' N'34'stringN'34'
Set the X11 device name for the touchscreen. This defaults to TOUCHSCREEN.
Option N'34'PortraitModeN'34' N'34'stringN'34'
Set the display orientation. The default is "landscape" but you can rotate the screen clockwise ("portrait") or anticlockwise ("portraitCCW").
Option N'34'SwapXYN'34' N'34'booleanN'34'
Swap the X and Y values on the display. The default is false.
Option N'34'TapButtonN'34' N'34'booleanN'34'
Set the touchscreen tap to act as mouse button 1. This allows single handed operation except when using the menu buttons. The default is false.
 



BUGS   Début   Précédent   Suivant   Sommaire   Préc.page.lue   Accueil
The driver has been tested on the Palmax systems, the defaults reflect the Palmax hardware and should work out of the box. No testing has been done on other systems using the same digitizer.

Support for a double-tap menu button option would be nice.

The smoothing algorithm would benefit from real mathematics.

Xorg needs a nice calibration tool.

 




SEE ALSO   Début   Précédent   Suivant   Sommaire   Préc.page.lue   Accueil
Xorg(1), xorg.conf(5), xorgconfig(1), Xserver(1), X(7).  



AUTHORS   Début   Précédent   Suivant   Sommaire   Préc.page.lue   Accueil
Authors include...
 Alan Cox


 



Sommaire   Début   Suivant   Sommaire   Préc.page.lue   Accueil
NAME
SYNOPSIS
DESCRIPTION
SUPPORTED HARDWARE
CONFIGURATION DETAILS
BUGS
SEE ALSO
AUTHORS

Table des mots clés   Début   Suivant   Sommaire   Préc.page.lue   Accueil
Option N'34'DeviceN'34' N'34'stringN'34'CONFIGURATION DETAILS
Option N'34'DeviceNameN'34' N'34'stringN'34'CONFIGURATION DETAILS
Option N'34'MaxXN'34' N'34'integerN'34'CONFIGURATION DETAILS
Option N'34'MaxYN'34' N'34'integerN'34'CONFIGURATION DETAILS
Option N'34'MinXN'34' N'34'integerN'34'CONFIGURATION DETAILS
Option N'34'MinYN'34' N'34'integerN'34'CONFIGURATION DETAILS
Option N'34'PortraitModeN'34' N'34'stringN'34'CONFIGURATION DETAILS
Option N'34'ScreenN'34' N'34'integerN'34'CONFIGURATION DETAILS
Option N'34'SwapXYN'34' N'34'booleanN'34'CONFIGURATION DETAILS
Option N'34'TapButtonN'34' N'34'booleanN'34'CONFIGURATION DETAILS



Ce document a été créé par man2html suivi de man2html.pl, le 17/10/2008 17:54:17, en utilisant les pages de 'man'.
 

Valid HTML 4.01 Transitional